Event List

Start It! Equipment Training is intended for individuals who would like to begin using equipment at the Library's Makerspace. Complete the Makerspace Safety Training to learn more about safety and age requirements at the Exchange. 

A different Equipment Training session is required for each piece of equipment. Choose one piece of equipment from list for your training.

To ensure that all customers are accommodated, we kindly ask that each customer limits their number of trainings to one per week.

Note: It is possible that training may take more than 1 hour. 

For training on the Precision Mini Lathe, the Resin 3D Printer, or the Bandsaw, call or email the LPCPL Exchange.

If no Start It! times are available, please call the Exchange to set up a training. 

To learn more about the Library's Makerspace visit our website. 

Start It! Equipment Training is intended for individuals who would like to begin using equipment at the Library's Makerspace. Complete the Makerspace Safety Training to learn more about safety and age requirements at the Exchange. 

A different Equipment Training session is required for each piece of equipment. Choose one piece of equipment from list for your training.

To ensure that all customers are accommodated, we kindly ask that each customer limits their number of trainings to one per week.

Note: It is possible that training may take more than 1 hour. 

For training on the Precision Mini Lathe, the Resin 3D Printer, or the Bandsaw, call or email the LPCPL Exchange.

If no Start It! times are available, please call the Exchange to set up a training. 

To learn more about the Library's Makerspace visit our website. 

Start It! Equipment Training is intended for individuals who would like to begin using equipment at the Library's Makerspace. Complete the Makerspace Safety Training to learn more about safety and age requirements at the Exchange. 

A different Equipment Training session is required for each piece of equipment. Choose one piece of equipment from list for your training.

To ensure that all customers are accommodated, we kindly ask that each customer limits their number of trainings to one per week.

Note: It is possible that training may take more than 1 hour. 

For training on the Precision Mini Lathe, the Resin 3D Printer, or the Bandsaw, call or email the LPCPL Exchange.

If no Start It! times are available, please call the Exchange to set up a training. 

To learn more about the Library's Makerspace visit our website. 

Start It! Equipment Training is intended for individuals who would like to begin using equipment at the Library's Makerspace. Complete the Makerspace Safety Training to learn more about safety and age requirements at the Exchange. 

A different Equipment Training session is required for each piece of equipment. Choose one piece of equipment from list for your training.

To ensure that all customers are accommodated, we kindly ask that each customer limits their number of trainings to one per week.

Note: It is possible that training may take more than 1 hour. 

For training on the Precision Mini Lathe, the Resin 3D Printer, or the Bandsaw, call or email the LPCPL Exchange.

If no Start It! times are available, please call the Exchange to set up a training. 

To learn more about the Library's Makerspace visit our website. 

Start It! Equipment Training is intended for individuals who would like to begin using equipment at the Library's Makerspace. Complete the Makerspace Safety Training to learn more about safety and age requirements at the Exchange. 

A different Equipment Training session is required for each piece of equipment. Choose one piece of equipment from list for your training.

To ensure that all customers are accommodated, we kindly ask that each customer limits their number of trainings to one per week.

Note: It is possible that training may take more than 1 hour. 

For training on the Precision Mini Lathe, the Resin 3D Printer, or the Bandsaw, call or email the LPCPL Exchange.

If no Start It! times are available, please call the Exchange to set up a training. 

To learn more about the Library's Makerspace visit our website. 

Start It! Equipment Training is intended for individuals who would like to begin using equipment at the Library's Makerspace. Complete the Makerspace Safety Training to learn more about safety and age requirements at the Exchange. 

A different Equipment Training session is required for each piece of equipment. Choose one piece of equipment from list for your training.

To ensure that all customers are accommodated, we kindly ask that each customer limits their number of trainings to one per week.

Note: It is possible that training may take more than 1 hour. 

For training on the Precision Mini Lathe, the Resin 3D Printer, or the Bandsaw, call or email the LPCPL Exchange.

If no Start It! times are available, please call the Exchange to set up a training. 

To learn more about the Library's Makerspace visit our website. 

Start It! Equipment Training is intended for individuals who would like to begin using equipment at the Library's Makerspace. Complete the Makerspace Safety Training to learn more about safety and age requirements at the Exchange. 

A different Equipment Training session is required for each piece of equipment. Choose one piece of equipment from list for your training.

To ensure that all customers are accommodated, we kindly ask that each customer limits their number of trainings to one per week.

Note: It is possible that training may take more than 1 hour. 

For training on the Precision Mini Lathe, the Resin 3D Printer, or the Bandsaw, call or email the LPCPL Exchange.

If no Start It! times are available, please call the Exchange to set up a training. 

To learn more about the Library's Makerspace visit our website. 

Start It! Equipment Training is intended for individuals who would like to begin using equipment at the Library's Makerspace. Complete the Makerspace Safety Training to learn more about safety and age requirements at the Exchange. 

A different Equipment Training session is required for each piece of equipment. Choose one piece of equipment from list for your training.

To ensure that all customers are accommodated, we kindly ask that each customer limits their number of trainings to one per week.

Note: It is possible that training may take more than 1 hour. 

For training on the Precision Mini Lathe, the Resin 3D Printer, or the Bandsaw, call or email the LPCPL Exchange.

If no Start It! times are available, please call the Exchange to set up a training. 

To learn more about the Library's Makerspace visit our website. 

Start It! Equipment Training is intended for individuals who would like to begin using equipment at the Library's Makerspace. Complete the Makerspace Safety Training to learn more about safety and age requirements at the Exchange. 

A different Equipment Training session is required for each piece of equipment. Choose one piece of equipment from list for your training.

To ensure that all customers are accommodated, we kindly ask that each customer limits their number of trainings to one per week.

Note: It is possible that training may take more than 1 hour. 

For training on the Precision Mini Lathe, the Resin 3D Printer, or the Bandsaw, call or email the LPCPL Exchange.

If no Start It! times are available, please call the Exchange to set up a training. 

To learn more about the Library's Makerspace visit our website. 

Start It! Equipment Training is intended for individuals who would like to begin using equipment at the Library's Makerspace. Complete the Makerspace Safety Training to learn more about safety and age requirements at the Exchange. 

A different Equipment Training session is required for each piece of equipment. Choose one piece of equipment from list for your training.

To ensure that all customers are accommodated, we kindly ask that each customer limits their number of trainings to one per week.

Note: It is possible that training may take more than 1 hour. 

For training on the Precision Mini Lathe, the Resin 3D Printer, or the Bandsaw, call or email the LPCPL Exchange.

If no Start It! times are available, please call the Exchange to set up a training. 

To learn more about the Library's Makerspace visit our website. 

Start It! Equipment Training is intended for individuals who would like to begin using equipment at the Library's Makerspace. Complete the Makerspace Safety Training to learn more about safety and age requirements at the Exchange. 

A different Equipment Training session is required for each piece of equipment. Choose one piece of equipment from list for your training.

To ensure that all customers are accommodated, we kindly ask that each customer limits their number of trainings to one per week.

Note: It is possible that training may take more than 1 hour. 

For training on the Precision Mini Lathe, the Resin 3D Printer, or the Bandsaw, call or email the LPCPL Exchange.

If no Start It! times are available, please call the Exchange to set up a training. 

To learn more about the Library's Makerspace visit our website. 

Start It! Equipment Training is intended for individuals who would like to begin using equipment at the Library's Makerspace. Complete the Makerspace Safety Training to learn more about safety and age requirements at the Exchange. 

A different Equipment Training session is required for each piece of equipment. Choose one piece of equipment from list for your training.

To ensure that all customers are accommodated, we kindly ask that each customer limits their number of trainings to one per week.

Note: It is possible that training may take more than 1 hour. 

For training on the Precision Mini Lathe, the Resin 3D Printer, or the Bandsaw, call or email the LPCPL Exchange.

If no Start It! times are available, please call the Exchange to set up a training. 

To learn more about the Library's Makerspace visit our website.