Week Calendar

Start It! Equipment Training is intended for individuals who would like to begin using equipment at the Library's Makerspace. Complete the Makerspace Safety Training to learn more about safety and age requirements at the Exchange. 

A different Equipment Training session is required for each piece of equipment. Choose one piece of equipment from list for your training.

To ensure that all customers are accommodated, we kindly ask that each customer limits their number of trainings to one per week.

Note: It is possible that training may take more than 1 hour. 

For training on the Precision Mini Lathe, the Resin 3D Printer, or the Bandsaw, call or email the LPCPL Exchange.

If no Start It! times are available, please call the Exchange to set up a training. 

To learn more about the Library's Makerspace visit our website. 

Start It! Equipment Training is intended for individuals who would like to begin using equipment at the Library's Makerspace. Complete the Makerspace Safety Training to learn more about safety and age requirements at the Exchange. 

A different Equipment Training session is required for each piece of equipment. Choose one piece of equipment from list for your training.

To ensure that all customers are accommodated, we kindly ask that each customer limits their number of trainings to one per week.

Note: It is possible that training may take more than 1 hour. 

For training on the Precision Mini Lathe, the Resin 3D Printer, or the Bandsaw, call or email the LPCPL Exchange.

If no Start It! times are available, please call the Exchange to set up a training. 

To learn more about the Library's Makerspace visit our website. 

Start It! Equipment Training is intended for individuals who would like to begin using equipment at the Library's Makerspace. Complete the Makerspace Safety Training to learn more about safety and age requirements at the Exchange. 

A different Equipment Training session is required for each piece of equipment. Choose one piece of equipment from list for your training.

To ensure that all customers are accommodated, we kindly ask that each customer limits their number of trainings to one per week.

Note: It is possible that training may take more than 1 hour. 

For training on the Precision Mini Lathe, the Resin 3D Printer, or the Bandsaw, call or email the LPCPL Exchange.

If no Start It! times are available, please call the Exchange to set up a training. 

To learn more about the Library's Makerspace visit our website. 

Sing, move, dance, and rhyme with us during this interactive storytime!

Babies and their grown-up are encouraged to engage and participate in a storytime structured around the Every Child Ready to Read™ curriculum! Classes incorporate books, technology, movement, and hands-on practice to engage children and adults in a fun, friendly environment.

Start It! Equipment Training is intended for individuals who would like to begin using equipment at the Library's Makerspace. Complete the Makerspace Safety Training to learn more about safety and age requirements at the Exchange. 

A different Equipment Training session is required for each piece of equipment. Choose one piece of equipment from list for your training.

To ensure that all customers are accommodated, we kindly ask that each customer limits their number of trainings to one per week.

Note: It is possible that training may take more than 1 hour. 

For training on the Precision Mini Lathe, the Resin 3D Printer, or the Bandsaw, call or email the LPCPL Exchange.

If no Start It! times are available, please call the Exchange to set up a training. 

To learn more about the Library's Makerspace visit our website. 

Get ready for kindergarten with stories, songs, movement and more!

Preparing for kindergarten begins long before preschool and kindergarten sign ups! Storytimes build the skills needed for kindergarten and provide helpful tips for adults to use at home. Structured around the Every Child Ready to Read™ Curriculum, storytime is a great way to have fun while working on reading skills, social skills, and motor skills.

Start It! Equipment Training is intended for individuals who would like to begin using equipment at the Library's Makerspace. Complete the Makerspace Safety Training to learn more about safety and age requirements at the Exchange. 

A different Equipment Training session is required for each piece of equipment. Choose one piece of equipment from list for your training.

To ensure that all customers are accommodated, we kindly ask that each customer limits their number of trainings to one per week.

Note: It is possible that training may take more than 1 hour. 

For training on the Precision Mini Lathe, the Resin 3D Printer, or the Bandsaw, call or email the LPCPL Exchange.

If no Start It! times are available, please call the Exchange to set up a training. 

To learn more about the Library's Makerspace visit our website. 

Start It! Equipment Training is intended for individuals who would like to begin using equipment at the Library's Makerspace. Complete the Makerspace Safety Training to learn more about safety and age requirements at the Exchange. 

A different Equipment Training session is required for each piece of equipment. Choose one piece of equipment from list for your training.

To ensure that all customers are accommodated, we kindly ask that each customer limits their number of trainings to one per week.

Note: It is possible that training may take more than 1 hour. 

For training on the Precision Mini Lathe, the Resin 3D Printer, or the Bandsaw, call or email the LPCPL Exchange.

If no Start It! times are available, please call the Exchange to set up a training. 

To learn more about the Library's Makerspace visit our website. 

This family-friendly storytime focuses on stories, songs and more for all ages! Pajamas and a favorite stuffed animal are welcome for this fun, evening event!

Start It! Equipment Training is intended for individuals who would like to begin using equipment at the Library's Makerspace. Complete the Makerspace Safety Training to learn more about safety and age requirements at the Exchange. 

A different Equipment Training session is required for each piece of equipment. Choose one piece of equipment from list for your training.

To ensure that all customers are accommodated, we kindly ask that each customer limits their number of trainings to one per week.

Note: It is possible that training may take more than 1 hour. 

For training on the Precision Mini Lathe, the Resin 3D Printer, or the Bandsaw, call or email the LPCPL Exchange.

If no Start It! times are available, please call the Exchange to set up a training. 

To learn more about the Library's Makerspace visit our website. 

Start It! Equipment Training is intended for individuals who would like to begin using equipment at the Library's Makerspace. Complete the Makerspace Safety Training to learn more about safety and age requirements at the Exchange. 

A different Equipment Training session is required for each piece of equipment. Choose one piece of equipment from list for your training.

To ensure that all customers are accommodated, we kindly ask that each customer limits their number of trainings to one per week.

Note: It is possible that training may take more than 1 hour. 

For training on the Precision Mini Lathe, the Resin 3D Printer, or the Bandsaw, call or email the LPCPL Exchange.

If no Start It! times are available, please call the Exchange to set up a training. 

To learn more about the Library's Makerspace visit our website. 

Start It! Equipment Training is intended for individuals who would like to begin using equipment at the Library's Makerspace. Complete the Makerspace Safety Training to learn more about safety and age requirements at the Exchange. 

A different Equipment Training session is required for each piece of equipment. Choose one piece of equipment from list for your training.

To ensure that all customers are accommodated, we kindly ask that each customer limits their number of trainings to one per week.

Note: It is possible that training may take more than 1 hour. 

For training on the Precision Mini Lathe, the Resin 3D Printer, or the Bandsaw, call or email the LPCPL Exchange.

If no Start It! times are available, please call the Exchange to set up a training. 

To learn more about the Library's Makerspace visit our website. 

Join the Mobile Library in your neighborhood! La Porte County Public Library offers mobile library service that carries books, movies, and more to customers in our service area. 

At the bookmobile, you can:

• Borrow popular books, DVDs, and more -- just like at the library!
• Get a library card or update your account
• Pick up holds and return items
• Get answers to your questions or help finding community resources

Do you have an event you'd like the Mobile Library to attend? Know a good place for the Mobile Library to stop? Email outreach@laportelibrary.org to get started.